Make a Duck Call Out of Shotshells

It’s a snap to make with a few common tools and pairs of spent 12-gauge shells. Instructions: Whistle work Step 1: Heat the brass head in the flame of a propane torch. Wearing a work glove, hold on to the brass and gently pull the plastic case away with pliers. Remove the plastic cup inside the brass head by reheating the brass and then scraping away the plastic with a flat-tip screwdriver. Step 2: Place the brass head (with primer down) on a 1-inch stack of cardboard. Use the screwdriver to partially flatten the metal flanges that held the primer of each brass head. Hold the pair together and blow through the holes. The final sound will be louder and sharper. Step 3: Widen the rim of the high brass head to accept the other head: Use a rotary tool to grind the rim of a 9⁄16-inch socket slightly so the ground rim barely fits into the brass head. Tap it with a hammer to widen the circumference of the brass, then remove.
shotgun shell duck bell tutorial
Watch Your Tone: Whistles made from low or high brass heads will make different sounds, so keep a variety on your lanyard.

This loud, breathy whistle is a charmer for teal and wigeon. It’s a snap to make with a few common tools and pairs of spent 12-gauge shells. Each requires either one low brass head shell (approximately 5⁄16 inch tall) and one high brass head (approximately 5⁄8 inch tall), or two low brass head shells.

Instructions: Whistle work

duck bell tutorial step one
Heat the brass head.

Step 1: Heat the brass head in the flame of a propane torch. Wearing a work glove, hold on to the…

Share on Facebook0Share on Google+0Tweet about this on TwitterShare on LinkedIn0
Tags from the story
,
More from Industry News

Perfecting The Mend

Source: fieldandstream.com Wait until your line is even with your position to...
Read More

Leave a Reply

Your email address will not be published. Required fields are marked *